[3D Printing] 3D Print Files for Custom Beyblade Burst

3D Printing 3D Print Files for Custom Beyblade Burst - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Off-Topic Forums (https://worldbeyblade.org/Forum-Off-Topic-Forums)
+--- Forum: Your Creations (https://worldbeyblade.org/Forum-Your-Creations)
+--- Thread: 3D Printing 3D Print Files for Custom Beyblade Burst (/Thread-3D-Printing-3D-Print-Files-for-Custom-Beyblade-Burst)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

RE: 3D Print Files for Custom Beyblade Burst - HakaishinLDrago - Mar. 02, 2020

(Mar. 01, 2020 11:57 PM)lilphilyb Wrote: I made the Evolution to Brave Valkyrie! Meet Charge Valkyrie.

https://www.tinkercad.com/things/eWQSHGs2CO0

If this still spins right then it'll burst real easy I can already tell (plus I made geist Fafnir spin right before so I would know how easy it is).

RE: 3D Print Files for Custom Beyblade Burst - lilphilyb - Mar. 02, 2020

Well guys, I made my first Custom Cho-X Layer, Lord PowerBlade

https://www.tinkercad.com/things/6ja8HXSqO2r

RE: 3D Print Files for Custom Beyblade Burst - snoc - Mar. 02, 2020

(Mar. 02, 2020 2:30 AM)lilphilyb Wrote: Well guys, I made my first Custom Cho-X Layer, Lord PowerBlade

https://www.tinkercad.com/things/6ja8HXSqO2r

nice. I like how the blue and red parts come together

RE: 3D Print Files for Custom Beyblade Burst - lilphilyb - Mar. 02, 2020

(Mar. 02, 2020 2:31 AM)snoc Wrote:
(Mar. 02, 2020 2:30 AM)lilphilyb Wrote: Well guys, I made my first Custom Cho-X Layer, Lord PowerBlade

https://www.tinkercad.com/things/6ja8HXSqO2r

nice. I like how the blue and red parts come together

Fun Fact: Raise Longinus and Lord PowerBlade Share the same Base

RE: 3D Print Files for Custom Beyblade Burst - Dacatman - Mar. 02, 2020

Check me out bois, on Tinkercad I go by "Creator The Blader"!

RE: 3D Print Files for Custom Beyblade Burst - Darkron - Mar. 04, 2020

Can anyone help me make a dual spin spin stealing attack type With custom parts please

RE: 3D Print Files for Custom Beyblade Burst - lilphilyb - Mar. 04, 2020

The Logo is famous, the fanfare is famous, it's 20th Century Studios (Fox)! But as a Layer? Take a look for yourself, www.tinkercad.com/things/lyOerpMPX1e

RE: 3D Print Files for Custom Beyblade Burst - Dacatman - Mar. 04, 2020

(Mar. 04, 2020 2:00 AM)lilphilyb Wrote: The Logo is famous, the fanfare is famous, it's 20th Century Studios (Fox)! But as a Layer? Take a look for yourself, www.tinkercad.com/things/lyOerpMPX1e

For good designs click here:
https://www.tinkercad.com/users/fudvR35xQJT-creator-the-blader-modelblader

RE: 3D Print Files for Custom Beyblade Burst - Darkron - Mar. 04, 2020

Thank you but how do I make it dual spin

RE: 3D Print Files for Custom Beyblade Burst - Dacatman - Mar. 05, 2020

If you send me the shape via stl. I can make it dual spin.

RE: 3D Print Files for Custom Beyblade Burst - Darkron - Mar. 06, 2020

I made my frame already I just need to get my teacher at school to 3-D print it for me however for now mine is just going to be counter clockwise spinning

RE: 3D Print Files for Custom Beyblade Burst - BeyZoid Corrupt - Mar. 29, 2020

@[CrazyAries] could you take a look at my 3d beyblade

RE: 3D Print Files for Custom Beyblade Burst - lilphilyb - Apr. 01, 2020

These designs are based of Breakerz's post in "What if another company you disliked took the beyblade License", so Kudos to him for inspiring the idea of the design.

Krabby Spin (must look in the "View in 3D" mode to see it because of a glitch)
https://www.tinkercad.com/things/k8kJt2gSTBh

Patty
Https://www.tinkercad.com/things/jfvfBIZFbSt

Stock combo: Krabby Spin Outer Patty

RE: 3D Print Files for Custom Beyblade Burst - 8675700752 - Apr. 08, 2020

Hey crazy Aries I will also like a new 3-D printer to Beyblade
If you are busy right now that’s fine but when you get the time can you please do mine

RE: 3D Print Files for Custom Beyblade Burst - MasterOfTheSky - Apr. 09, 2020

https://www.tinkercad.com/things/9ur7zIONPjC My new design for baskark (Hideous Baskark) hope you enjoy! (it is the sparking system)

RE: 3D Print Files for Custom Beyblade Burst - N12N12 - Apr. 09, 2020

(Apr. 08, 2020 11:38 PM)8675700752 Wrote: Hey crazy Aries I will also like a new 3-D printer to Beyblade
If you are busy right now that’s fine but when you get the time can you please do mine

I do not think he accepts designs. I mean you can post your own designs on here or find someone else on this thread, or use Shapeways. I don't think aries acceptes designs. Sorry about spelling. I lazy.

RE: 3D Print Files for Custom Beyblade Burst - Corrupt - Apr. 14, 2020

Yeah, he doesn't take up commisions. However, he was nice enough to do a collaboration with me on our custom GT Base, "SuperNatural". Made it in October, still haven't made it public xD.

RE: 3D Print Files for Custom Beyblade Burst - N12N12 - Apr. 15, 2020

plz mke it public

RE: 3D Print Files for Custom Beyblade Burst - Kaiser138 - Apr. 15, 2020

I have modeled a few Drivers and Discs, and I tried making a Layer but to no avail. May I use your work as a template to model Layers ? I would just use the teeth mechanism on your model.

RE: 3D Print Files for Custom Beyblade Burst - AwakenBurst - Apr. 18, 2020

does anyone think they could help turn my Valkyrie for my new system into a 3d design
the layer can split in half because of the awaken system
https://i.postimg.cc/dVdMqXQL/awaken-valkyrie.png

RE: 3D Print Files for Custom Beyblade Burst - KinkoUsagi - Apr. 18, 2020

We should start a petition to get CrazyAries attention for a job from Takara Tomy (or Hasbro, but EW)

RE: 3D Print Files for Custom Beyblade Burst - Donkat Three - Apr. 18, 2020

(Jun. 14, 2018 7:45 PM)CrazyAries Wrote: Hello, this is CrazyAries.
About two weeks ago, I designed a Layer of Beyblade Burst for ilinnuc, and he made some videos for that.
After that, Many people sent me PM and applauded the beyblade I designed. Some of them asked me to design a beyblade for them. I am glad that so many people like my work and I do understand that it is really exciting to have a own custom beyblade. Unfortunately, it is really difficult for me, as a single person, to satisfy so many people, since I have my own work and study.
However, I can design some beyblade and share with all people here. In this thread, I would post one or two Layer design every month and share them on my Google Drive. You can download the files and look for a workshop to print it if you like them.
As you download the .zip files, you need to extract the files and you would see a .stp file as well as a .stl file. The .stp file is a backup, and the ones who want to add something or modify the model can work on this file. And the .stl file is the one you would need for 3D print.

Here is the first beyblade for all you guys:
Blast Katana:
Download

pic (Click to View)

Recommended combos:
6Vortex.Xtreme/Jolt
7Bump.Revolve/Orbit

I cant see the picture of the bey, and all i get is the link, am i doing something wrong?

RE: 3D Print Files for Custom Beyblade Burst - RiseAshindra12 - Apr. 19, 2020

I don't know if we have to list the names of the best but here they are, it should be easy because the beys are like Helios and Hyperion and they are for me and my brother.
Me:
Thunder Achelous Zoom 4B
Achelous Chip: Left spin
Ring: Thunder: Like a fusion of Valtryek's 3 blades and Fafnir's rubber attack points, Thunder is utilized to attack and steal spin from other beys.
Double Chassis: 4B: A mode changing chassis for attack, stamina, and defense with 6 blades
Driver: Zoom: A driver like Zone but fused with Claw from Horusood for extra speed from its centrifugal force.
TA.Zm.4B
Colors:
Chip: like Helios but Green
Ring: Valtryek Blades: sea green, Fafnir absorb points, blue.
Chassis: Beige
Driver: Seafoam Green
My Brother:
Flow Alpheus Roar 4A
Alpheus Chip: Right spin
Ring: Flow: Like a fusion of the Union and Zwei Layer bases for strong attacks, when able to switch union part modes from speed to power mode manually
Double Chassis: 4B: A chassis like 1A but has 2 thin strike blades.
Driver: Roar: A driver like Xceed but fused with Claw from Horusood for extra speed from its centrifugal force.
FA.Rr.4A
Colors:
Chip: like Hyperion But Blue
Ring: Union Blades: ocean blue, Zwei blades, aquamarine.
Chassis: Blue-Violet
Driver: Navy Blue
Also, instead of Beys of the sun, these are beys of the water.

RE: 3D Print Files for Custom Beyblade Burst - KinkoUsagi - Apr. 23, 2020

[Image: GSDEcNe.jpg]

CrazyAries is a genius!

RE: 3D Print Files for Custom Beyblade Burst - originalzankye - Apr. 23, 2020

They look amazing, great job.