+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Off-Topic Forums (https://worldbeyblade.org/Forum-Off-Topic-Forums)
+--- Forum: Your Creations (https://worldbeyblade.org/Forum-Your-Creations)
+--- Thread: 3D Printing 3D Print Files for Custom Beyblade Burst (/Thread-3D-Printing-3D-Print-Files-for-Custom-Beyblade-Burst)
RE: 3D Print Files for Custom Beyblade Burst - BuilderROB - Dec. 02, 2019
(Dec. 02, 2019 8:01 PM)Dacatman Wrote: No, Aero is a disc so, Aero’ could be the name for a disc, it could be called Acro, Astro, or Alter (my original names for it)
Aero’ is also a disc. A real one.
RE: 3D Print Files for Custom Beyblade Burst - Dacatman - Dec. 02, 2019
Oh wait, I was wrong. ?
RE: 3D Print Files for Custom Beyblade Burst - N12N12 - Dec. 02, 2019
i couldnt find your aero'
RE: 3D Print Files for Custom Beyblade Burst - Nyarko - Dec. 03, 2019
(Dec. 02, 2019 4:26 PM)Dacatman Wrote: Size down the disc and give it a higher weight in the center to allow those good attacks with the disc and the layer combination, but allowing the Beyblade to maintain balance.
And I get it know, it’s sort of like a tetra sabers with the ease of dual sabers (Breaker and Xeno Xcalibur)
Is it an attack type or balance type?
Indeed it is sir. Based off of my favorite bey, Inferno Ifrit.
My theory for the disc was that there would be 3 free-moving balls on each wing so that as high velocity, the balls would be closer to the outer circumference of the beyblade, increasing centrifugal force. Then as velocity decreases, the balls would move towards the center of the beyblade, increasing centripetal force.
In addition, I wanted to make the disc so that depending on the way the bey is assembled prior to battle, it starts off in "attack" or "defense" mode. Then as the beyblade clicks in battle, the beyblade will migrate from one mode to the other.
Attack - The disc wings expose the primary contact points.
Defense - The disc wings cover the primary contact points
Also, any suggestions on the names as I'm still thinking of more. I'm currently on the layer being called "Aether Ifrit" and the disc being called "Dawn"
(Dec. 02, 2019 4:26 PM)Dacatman Wrote: Size down the disc and give it a higher weight in the center to allow those good attacks with the disc and the layer combination, but allowing the Beyblade to maintain balance.
And I get it know, it’s sort of like a tetra sabers with the ease of dual sabers (Breaker and Xeno Xcalibur)
Is it an attack type or balance type?
Also, I don't plan on the disc being any larger than the circumference of the blue triangle points on the layer.
RE: 3D Print Files for Custom Beyblade Burst - Dacatman - Dec. 03, 2019
Ok, I didn’t know that, maybe you could use Kernel2’ since it is a balance type.
Images:
https://drive.google.com/file/d/1TDy-U42EMT5vLDroZ7L0K0Ftu3D3HbGi/view?usp=drivesdk
https://drive.google.com/file/d/1comUvNuvsyw-OW23ZCIzIr63C73mBKrb/view?usp=drivesdk
https://drive.google.com/file/d/1s37nNo5IthR_yqgUcG-rxvxcgaCxQ9YY/view?usp=drivesdk
https://drive.google.com/file/d/1TxKetiPi_SZ8yS4ed-O2am_LSUKw4DSP/view?usp=drivesdk
(Dec. 02, 2019 10:42 PM)N12N12 Wrote: i couldnt find your aero'
I know, I’m going to upload a photo of it tonight.
RE: 3D Print Files for Custom Beyblade Burst - N12N12 - Dec. 04, 2019
cool!!!!!!!!!!!1
RE: 3D Print Files for Custom Beyblade Burst - Nyarko - Dec. 04, 2019
(Dec. 03, 2019 3:08 PM)Dacatman Wrote: Ok, I didn’t know that, maybe you could use Kernel2’ since it is a balance type.
Images:
https://drive.google.com/file/d/1TDy-U42EMT5vLDroZ7L0K0Ftu3D3HbGi/view?usp=drivesdk
https://drive.google.com/file/d/1comUvNuvsyw-OW23ZCIzIr63C73mBKrb/view?usp=drivesdk
https://drive.google.com/file/d/1s37nNo5IthR_yqgUcG-rxvxcgaCxQ9YY/view?usp=drivesdk
https://drive.google.com/file/d/1TxKetiPi_SZ8yS4ed-O2am_LSUKw4DSP/view?usp=drivesdk
(Dec. 02, 2019 10:42 PM)N12N12 Wrote: i couldnt find your aero'
I know, I’m going to upload a photo of it tonight.
What does Kernel2' specialize in?
RE: 3D Print Files for Custom Beyblade Burst - Sora1654 - Dec. 04, 2019
I made two sketches of a 3d printed beyblades. One was a gt version and the other was cho-z both of their name had caelum in it but I cant figure the other part of their name
RE: 3D Print Files for Custom Beyblade Burst - Dacatman - Dec. 04, 2019
(Dec. 03, 2019 3:08 PM)Dacatman Wrote: Ok, I didn’t know that, maybe you could use Kernel2’ since it is a balance type.What does Kernel2’ specialize in?
Images:
https://drive.google.com/file/d/1TDy-U42EMT5vLDroZ7L0K0Ftu3D3HbGi/view?usp=drivesdk
https://drive.google.com/file/d/1comUvNuvsyw-OW23ZCIzIr63C73mBKrb/view?usp=drivesdk
https://drive.google.com/file/d/1s37nNo5IthR_yqgUcG-rxvxcgaCxQ9YY/view?usp=drivesdk
https://drive.google.com/file/d/1TxKetiPi_SZ8yS4ed-O2am_LSUKw4DSP/view?usp=drivesdk
I know, I’m going to upload a photo of it tonight.
It is made to gimmick the movement of Fang Leone’s 120W2D.
https://drive.google.com/file/d/1lD415yPJxFkgKbF9Uykcl3KSlRlvx9aC/view?usp=drivesdk
Link for Acro (Aero’)
RE: 3D Print Files for Custom Beyblade Burst - Sumarbrander12 - Dec. 13, 2019
(Dec. 02, 2019 11:21 AM)Nyarko Wrote:Any ideas or suggestion guys?
I have ifritor and attempted multiple times to draw an evolution
RE: 3D Print Files for Custom Beyblade Burst - Nyarko - Dec. 23, 2019
(Dec. 13, 2019 8:27 AM)Sumarbrander12 Wrote:(Dec. 02, 2019 11:21 AM)Nyarko Wrote:
I have ifritor and attempted multiple times to draw an evolution
May I see?
RE: 3D Print Files for Custom Beyblade Burst - Sumarbrander12 - Dec. 27, 2019
(Dec. 23, 2019 11:52 PM)Nyarko Wrote:Trashed or lost all of the designed(Dec. 13, 2019 8:27 AM)Sumarbrander12 Wrote: I have ifritor and attempted multiple times to draw an evolution
May I see?
RE: 3D Print Files for Custom Beyblade Burst - phantom blade - Jan. 03, 2020
Does anyone know someone who is 3d printing beys
Does anyone know anyone that is willing to help me make my 3d bey
RE: 3D Print Files for Custom Beyblade Burst - Dacatman - Jan. 21, 2020
(Jan. 03, 2020 5:12 AM)phantom blade Wrote: Does anyone know someone who is 3d printing beysXandork Engineering
Does anyone know anyone that is willing to help me make my 3d bey
RE: 3D Print Files for Custom Beyblade Burst - CrazyAries - Jan. 27, 2020
Regalia Armor
![[Image: EPQFqMSXkAY2UCB?format=jpg&name=large]](https://pbs.twimg.com/media/EPQFqMSXkAY2UCB?format=jpg&name=large)
This is an Layer accessory similar to Bigbang Armor, which can be put on Mugen Lock (Infinity Lock) Beys like Prime Apocalypse and Regalia Genesis.
Since the details of Bigbang Armor was not revealed when I design this accessory, this is a little bit different with Bigbang Armor, that it would take off when the bey get huge hit, just like Revive Phoenix and Dead Phoenix. The performance is different as well. And even when the part is assembled, the burst risk is not 0, and there is still certain possibility of burst.
Video:
Spoiler (Click to View)
RE: 3D Print Files for Custom Beyblade Burst - Dacatman - Jan. 27, 2020
(Jan. 27, 2020 2:44 AM)CrazyAries Wrote: Regalia Armor
This is an Layer accessory similar to Bigbang Armor, which can be put on Mugen Lock (Infinity Lock) Beys like Prime Apocalypse and Regalia Genesis.
Since the details of Bigbang Armor was not revealed when I design this accessory, this is a little bit different with Bigbang Armor, that it would take off when the bey get huge hit, just like Revive Phoenix and Dead Phoenix. The performance is different as well. And even when the part is assembled, the burst risk is not 0, and there is still certain possibility of burst.
Video:DownloadSpoiler (Click to View)
Could you make Prime Armor
RE: 3D Print Files for Custom Beyblade Burst - fireblaze1 - Jan. 27, 2020
Hey guys go to my deviantart's account: https://www.deviantart.com/warriorearthmars01: Warriorearthmars01, then go to the Beyblade Elemental Force Folders to find some beyblade or gear like a launcher, stadium to make a 3d printed things made, ok
If you're up for this challenge, go for it
if you not up for it that ok.
Ok, the first four beys will be Dragoon Cyclone, Dranzer Flare, Draciel Fort Shell, & Driger Spark. Show these beys as Plastic gen or Burst Gens beys anyways you guys want and show on this pages.
Tell me about it
if yes go do that challenge or if no that be fine.
RE: 3D Print Files for Custom Beyblade Burst - N12N12 - Mar. 01, 2020
Where do I download zeus?
RE: 3D Print Files for Custom Beyblade Burst - KinkoUsagi - Mar. 01, 2020
I wish someone would be willing to print this for me (for money, obviously). I have the files, I just have no idea how to work 3D printers.
RE: 3D Print Files for Custom Beyblade Burst - lilphilyb - Mar. 01, 2020
I have created a Longinus Evolution but with a twist, it is an After sparking Evolution, here it is,
https://www.tinkercad.com/things/1jzMBvSo62p
RE: 3D Print Files for Custom Beyblade Burst - BuilderROB - Mar. 01, 2020
(Mar. 01, 2020 11:23 PM)lilphilyb Wrote: I have created a Longinus Evolution but with a twist, it is an After sparking Evolution, here it is,
https://www.tinkercad.com/things/1jzMBvSo62p
It looks...way too round to be an attack type, and it certainly is too round to be a Longinus. I would try and make the shape much more aggressive. Nice design though.
RE: 3D Print Files for Custom Beyblade Burst - BusyBlader - Mar. 01, 2020
(Mar. 01, 2020 10:36 PM)KinkoUsagi Wrote:
I wish someone would be willing to print this for me (for money, obviously). I have the files, I just have no idea how to work 3D printers.
I can get it printed at my local library, if you're okay with me having to ship it.
RE: 3D Print Files for Custom Beyblade Burst - lilphilyb - Mar. 01, 2020
I made the Evolution to Brave Valkyrie! Meet Charge Valkyrie.
https://www.tinkercad.com/things/eWQSHGs2CO0
RE: 3D Print Files for Custom Beyblade Burst - GreenK9148 - Mar. 02, 2020
(Mar. 01, 2020 11:57 PM)lilphilyb Wrote: I made the Evolution to Brave Valkyrie! Meet Charge Valkyrie.
https://www.tinkercad.com/things/eWQSHGs2CO0
Looks cool! But, it kinda looks like Geist fafnir
RE: 3D Print Files for Custom Beyblade Burst - lilphilyb - Mar. 02, 2020
(Mar. 02, 2020 12:00 AM)GreenK9148 Wrote:(Mar. 01, 2020 11:57 PM)lilphilyb Wrote: I made the Evolution to Brave Valkyrie! Meet Charge Valkyrie.
https://www.tinkercad.com/things/eWQSHGs2CO0
Looks cool! But, it kinda looks like Geist fafnir
Yeah, that was intentional, but hey, it gets better attack so that is a plus.