World Beyblade Organization by Fighting Spirits Inc.
Whine about your breaks - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade General (https://worldbeyblade.org/Forum-Beyblade-General)
+--- Thread: Whine about your breaks (/Thread-Whine-about-your-breaks)



RE: Whine about your breaks - Burn87 - May. 05, 2022

(May. 05, 2022  5:33 PM)kelleydesigns Wrote: rip dragon 1, broke by the Xtreme dash driver, don't use dash on dragon 1

thx for the tip


RE: Whine about your breaks - OwnageDerp - May. 07, 2022

My Rev Up Launcher pinion gears snapped, but that's like saying water is wet.


RE: Whine about your breaks - DedZeY - May. 08, 2022

Sad my helios 2 chip broke.
Rip helios 2 chip


RE: Whine about your breaks - Burn87 - May. 11, 2022

(May. 08, 2022  12:08 PM)DedZeY Wrote: Sad my helios 2 chip broke.
Rip helios 2 chip

that SUCKS, i know how good helios 2 is


RE: Whine about your breaks - Mr.Sushiroll - May. 11, 2022

the first time i printed my partner (Saturn Cronus) the ring was flipped and pieces broke off💀


RE: Whine about your breaks - Burn87 - May. 11, 2022

(May. 11, 2022  4:13 PM)Mr.Sushiroll Wrote: the first time i printed my partner (Saturn Cronus) the ring was flipped and pieces broke off💀

ooooooooooooooof that SUCKS


RE: Whine about your breaks - WizardBlader - May. 14, 2022

Welp, looks like I have some more breaks to share.

First one: My new power gear from the SP Dangerous Belial set broke, and its barely been a whole 2 months since I had gotten it.

The last one that occurred today: my brother’s Greatest Raphael Blade bursted so violently that it flew across my living room, and hit our TV. Oh boy, are we going to pay for that. Unhappy


RE: Whine about your breaks - Ryuujin K - May. 17, 2022

Ok, story time.

So I've received my package today (Burst Dragoon V2 and Devil Belial), and as I'm inspecting Dragoon, I noticed something... off.
I've got a factory defect (Click to View)

It may be a bit hard to tell, but upon close inspection, you'll see that the teeth part of the layer was inserted in the wrong orientation.
Fortunately though, it's aligned just barely enough to slip the driver in thanks to Wheel's narrower notches.
It still clicks too, up till the halfway point. From there on it slides. (Click to View)

So the good news is that i've got a (nearly) unburstable Dragoon V2 to mess around with, and later on I'll get another one. Without the defect pls.
The bad news is the one capable of bursting this menace gave up the last of its strength to stop the Bladebreaker... (Click to View)

Welp, gotta get another Guilty. Those stress marks were gonna give eventually.


RE: Whine about your breaks - BladerGem - May. 17, 2022

(May. 17, 2022  3:58 AM)Ryuujin K Wrote: Ok, story time.

So I've received my package today (Burst Dragoon V2 and Devil Belial), and as I'm inspecting Dragoon, I noticed something... off.
I've got a factory defect (Click to View)

It may be a bit hard to tell, but upon close inspection, you'll see that the teeth part of the layer was inserted in the wrong orientation.
Fortunately though, it's aligned just barely enough to slip the driver in thanks to Wheel's narrower notches.
It still clicks too, up till the halfway point. From there on it slides. (Click to View)

So the good news is that i've got a (nearly) unburstable Dragoon V2 to mess around with, and later on I'll get another one. Without the defect pls.
The bad news is the one capable of bursting this menace gave up the last of its strength to stop the Bladebreaker... (Click to View)

Welp, gotta get another Guilty. Those stress marks were gonna give eventually.

OOF, rip Guilty. Fitting that it happened because of a Bladebreaker though!


RE: Whine about your breaks - Mr.Sushiroll - May. 19, 2022

my venture tip got pushed in💀 how do i fix it


RE: Whine about your breaks - kelleydesigns - May. 19, 2022

i broke another gachi chip, this time the Ashura and Achilles chips


RE: Whine about your breaks - Mr.Sushiroll - May. 20, 2022

i broke a prong on my dragon sparking chip😭✋


RE: Whine about your breaks - Whiskeytango - May. 21, 2022

I bought two of the red Devil blades so I could have one for the collection and one for play. First time playing the one for play a huge chip came off one of the points. 😩🤬


RE: Whine about your breaks - micksterfist - May. 24, 2022

i broke both sides of the master ring
you know the parts that literally hold the bey together?
yeah those


RE: Whine about your breaks - micksterfist - Jun. 07, 2022

my scorpio facebolt broke
scorpio is one of my favorites


RE: Whine about your breaks - WD35 - Jul. 13, 2022

I was doing a stock tournament by myself and my Phoenix broke :(
It was against Cho-Z Achilles
The combos were Cho-Z Achilles 00.Dm. Vs. Dead Phoenix Ch.HH'
I wasn't using the armor because one of the prongs broke off
Pic: https://drive.google.com/file/d/11Cphsybj03gHkxo0WoOj7eHDvZ8ArKI3/view?usp=drivesdk


RE: Whine about your breaks - nice_guy77 - Jul. 14, 2022

(Jul. 13, 2022  4:03 AM)WD35 Wrote: I was doing a stock tournament by myself and my Phoenix broke Unhappy
It was against Cho-Z Achilles
The combos were Cho-Z Achilles 00.Dm. Vs. Dead Phoenix Ch.HH'
I wasn't using the armor because one of the prongs broke off
Pic: https://drive.google.com/file/d/11Cphsybj03gHkxo0WoOj7eHDvZ8ArKI3/view?usp=drivesdk

I never saw a Phoenix break like that, usually it’s just the armors (like mine)


RE: Whine about your breaks - WD35 - Jul. 20, 2022

My Killer Deathscyther broke Unhappy
I launched it too hard...
I really like Killer Deathscyther as well Unhappy
It was one of my first 2 TT burst beys...
Pic: https://drive.google.com/file/d/12lY3i0lUMYwkmO9FifoXfydEFp3ZmKb1/view?usp=drivesdk


RE: Whine about your breaks - Burn87 - Aug. 08, 2022

(May. 24, 2022  2:47 PM)micksterfist Wrote: i broke both sides of the master ring
you know the parts that literally hold the bey together?
yeah those

same, man, same, i feel the pain

my Master layer base broke
i was battling it against my Judgement combo
and Judgement got tired of losing because of stamina
and Judgement hit Master so hard one of the two prongs that hold the driver in place snapped off
luckily my 10Expand and Revolve parts didn't break

(May. 14, 2022  8:51 PM)WizardBlader Wrote: Welp, looks like I have some more breaks to share.

First one: My new power gear from the SP Dangerous Belial set broke, and its barely been a whole 2 months since I had gotten it.

The last one that occurred today: my brother’s Greatest Raphael Blade bursted so violently that it flew across my living room, and hit our TV. Oh boy, are we going to pay for that. Unhappy

DAMN


RE: Whine about your breaks - txzglYT - Aug. 14, 2022

My bearing’ broke after ONE TOURNAMENT. ONE.


RE: Whine about your breaks - Mr.Sushiroll - Nov. 20, 2022

um
ok so 3D printed the kingdom ring (credit to crazy aries) and put in the loninus chip as it it the only left spin DB core that i have- well i was battling it against a bunch of beys and i think i over-stressed it and the ring broke, but it also broke my atomic driver💀💀

yeah so the white part above the spring snapped in half but i have a spare one from my fake drivers and im currently trying to put it back in without damaging the driver, any suggestions?


RE: Whine about your breaks - ElDiablo69 - Mar. 08, 2023

when i used my absorb, the combo it was on flipped on its side and my Imperial Dragon Vn Qc' smashed it, snapping the free spinning ring in half


RE: Whine about your breaks - GodzillaFan101 - Mar. 09, 2023

Only buy beys that are 15 or higher because those 3.99 ones are absolute fakes. Found that out the hard way with a fake galaxy pegasus and fang leone


RE: Whine about your breaks - ElDiablo69 - Mar. 15, 2023

Now I have another thing to whine about. the same absorb driver breaking combo ripped my avatar attack stadium clean in half. Screw you, Imperial Dragon Pro Series (or should I say, @$$hole)


RE: Whine about your breaks - GodzillaFan101 - Mar. 15, 2023

Not to mention dread phoenix...